Cleco’s
Sheet holders provide the quickest method for holding sheets together for drilling or riveting. Drill the size hole needed for the rivet and insert the sheet holder. The holders listed comprise the most common sizes. Material thickness range 0" - 1/4". Colour coded for easy identification. Use with Cleco holder pliers.
| Cleco size |
Colour Code |
Drill size |
Metric size |
| 3/32" |
Cadium |
#40 |
2.4mm |
| 1/8" |
Copper |
#30 |
3.2mm |
| 5/32" |
Black |
#20 |
4.0mm |
| 3/16" |
Brass |
#10 |
4.8mm |
Side grip clamps
Designed to hold two or more work pieces together where no holes exist. Clamping force is applied at edge of work. Spring loaded, pliers actuated. The lack of a take-up screw makes it impossible to over-tighten and damage the work surfaces or the clamp. Two sizes available. Use with Cleco holder pliers
Clamping capacity - 0-1/2"
Jaw depth: 1/2" and 1"Overall Length: 2-3/16"
Cleco holder pliers
These pliers are designed to grip and actuate all standard sizes of sheet holders and side grip clamps. Available on two versions Economy and Premium.
Handi-clamp
Snaps open or shut with the flick of a thumb. Firm gripping, mar-prof jaws.
Reach: 25mm
Clamping Capacity: 0 – 4mm
Magnetic hole plug weld tool
Now it's easier than ever to use your MIG or TIG welder to fill that hole in the middle of a panel with metal! This versatile tool features a strong magnetic mount and an adjustable 1-1/4" diameter copper swivel back-up head. Just attach to the back of the panel to be repaired and adjust the arm to back up holes up to an inch in diameter. Weld deposited metal will not stick to the paddle and the copper helps absorb heat to minimize warpage. Limited lifetime manufacturer's warranty.
Inter-grip Panel clamps
Position flat or curved panels for precision butt welds with these innovative tools. Intergrips are miniature clamps that align panels edge to edge and surface to surface, leaving a.040" gap, for full weld penetration. Clamp the sections together, tack weld, and remove the intergrips for final welding. The result is a clean weld requiring little grinding.