Newly reformulated Carb Renew 2 has better fuel resistance and durability than the original formula, but still maintains that factory bronze look - Restore the OEM look found on just about any carburetor. Carb Renew 2 is a translucent acrylic enamel that is resistant to fuel and most additives. (Please read and follow label instructions carefully.) While your carburetor is apart and all jets are removed, simply spray Carb Renew 2 on the exterior of the thoroughly cleaned bowl cover and main body. Produces a natural 3-8% gloss. Carb Renew 2 comes in a 141g aerosol, enough to cover about 2 square feet.
141g Aerosol Can
Since Carb Renew 2 is translucent, IT'S VERY IMPORTANT to thoroughly clean the surface and bring the base metal to a uniform look. Carb Renew 2 is an acrylic enamel, covers 2 square feet, and withstands up to 148 degrees C. Use in a well ventilated area and wear a respirator. Apply in very light coats to replicate original plating
Always wear eye, skin and respiratory protection use in a well ventilated area consult MSDS for specific warnings and precautions
|Unit Of Measure||each|