A water-based rust remover and zinc phosphate pre-priming etch.
RustBlast effectively dissolves rust, corrosion, metal oxides, and tarnishing from most metal surfaces.
RustBlast provides a gentle etch to metal surfaces and coats the metal with Zinc Phosphate, creating a surface profile ideal for optimal adhesion. RustBlast also contains KBS unique Oxygen-Block technology, which reduces the effects of flash rusting by over 80% and extends rust-free storage times to 30 days or more.
RustBlast provides the second step in permanently stopping rust and corrosion by removing the metal contamination. Unlike most conventional rust removers that have little ability to handle even the smallest amount of surface contamination, RustBlast removes minor surface contamination including finger oils, road film and light hydrocarbon deposits.
RustBlast is non-toxic, non-hazardous and biodegradable and does not require any special disposal for typical use. RustBlast is so safe to use that minimal protective covering is needed. (glasses and gloves).
Easy-to-use spray or brush application. Apply RustBlast full strength to a clean surface keeping it wet for 20-30 minutes or more and watch rust, corrosion, metal oxides, and tarnishing vanish before your eyes!
RustBlast will gently etch the surface and leave a zinc phosphate coating to ensure a strong bond with any paint.
Removes & neutralizes rust
Provides etched surface profile for solid adhesion
Leaves a zinc phosphate base coating
Oxygen-Block enhanced for short term corrosion protection
Enhances welding conductivity
Non-flammable, no petroleum additives
RustBlast can be used on the following surfaces: steel, cast iron, brass aluminium, galvanizing, copper, steel alloys, fibreglass and other non-metallic surfaces.
RustBlast will also remove mill scale from new metal including structural steel, metal castings, and plate steel.
QTY: 4 Litres
|Unit Of Measure||each|