KBS RustSeal is a single component high-solid content, rust preventive coating / rust paint / sealer. It is impervious to road salts and almost every chemical. RustSeal self levels out to a smooth rock-hard finish that resists chips and scratches.
RustSeal is a single component, ready to use, high solid content, moisture-curing urethane.
- Apply directly over rust
- High solids (over 70%)
- Withstands high temperatures up to 316°C
- Single-component formula
- High abrasion & chemical resistance
- Seals and encapsulates rust & porous surfaces
- Remains flexible to expand & contract
- Self-levelling: brush, roll or spray
- VOC compliant
- Compatible with all paint systems
- Integrated preparation system
- Moderate UV stability unlike others
Unlike other high-performance corrosion protection products, RustSeal is a single-component product, so there are no mixing ratios involved. Simply stir and use.
RustSeal is extremely thick – stir for 5 minutes prior to use.
Apply at least two thin coats – thick application will bubble.
When applying with a spray gun, thin RustSeal with ‘KBS No.1 Thinners’ 5-20%.
With exceptional self levelling properties, RustSeal can be applied using almost any application, including brushing, spraying and rolling with no trace of brush or roller strokes.
-Automotive – Chassis, floor pans, wheel wells, fenders, trunks, engines, suspension parts, axles, roof drains, springs, doors, almost every part on a car except the exhaust!
-Marine – Engine rooms, hulls, masts, bilges, heat exchangers, decks, chain lockers, pumps, fuel tanks, boat trailers.
-Industrial – Heavy transport, steam pipes, sealing concrete, air conditioning repair, fibreglass repair, rebar coating, steel roof, fuel & waste-water treatment tanks.
-Household – Hand rails, support beams, lawn equipment, garage floors, pipe work, appliances, lead-based paint encapsulation.
1 Litre covers 5m square in 2 coats (10m square single coat)
|Unit Of Measure||each|