#8 is a medium thickness of our full length Splines. Over a metre long, this Spline is great for most large cars with a decent amount of shape and long straights. Ideal for working on 1940-80's cars, including classic and muscle cars with those long sweeping curves, this Spline is perfect. Use #8 to check for highs and lows, and spread filler accurately over large areas to dramatically cut down sanding times. Then also use it for block sanding.
The term "Spline" is used to describe the construction of a smooth curve. Working from a few control points (high spots) the Spline will take the path with minimal overall bending - this being the final desired surface.
How does this relate to refinishing cars?
Almost no surface on a car is flat or straight; nearly every surface has a shape. Very rarely is any surface a true radius. Every surface was created in a design studio with a Spline, either on a clay model or a computer screen. The surfaces bend, sweep and accelerate and only Splines can recreate this form. Using these to repair a surface is the most accurate way.
We can get good results with traditional sanding blocks, although blocks constantly take the average of the immediate surface around it. Blocks do not take into consideration the overall form of the surface. Whereas, a Spline allows absolute control of the surface.
Splines are the most accurate tool for perfecting bodywork. Whether it be in metal, filler, blocking sanding, or in final sanding ready to polish paint. It is the user’s decision to perfect the surface in steel, filler, or paint depending on the level of adjustment. Splines are used to find highs and lows, panel alignment, wipe in filler and sand from 80grit to 800grit. Yes, one tool does all that.
#8 Spline 1020 x 70 x 4.0mm THK