RestoFinish Epoxycoat Black 7 Litre Kit

RestoFinish EpoxyCoat – Restoration-Grade Epoxy Primer (7L Black Kit)

Australian-Made | Anti-Corrosive Zinc Phosphate | Unmatched Metal Protection

Rust doesn’t sleep — and neither should your primer. When bare metal is exposed to air, humidity, or even minor temperature shifts, corrosion begins almost immediately. Most primers are porous and allow oxygen and moisture through — making them unsuitable for long-term restoration projects.

RestoFinish EpoxyCoat solves this with an industrial-grade, zinc-phosphate-rich, non-porous epoxy system that locks out oxygen, bonds aggressively to steel, and seals surfaces from corrosion, solvents, and chemical attack.

• Forms a true non-porous barrier, protecting bare steel long-term
• Chemically bonds to steel, existing coatings, and body filler
• Delivers superior film build (up to 150 microns in two coats)
• Withstands solvents, chemical cleaners, and harsh environments
• Keeps your panels protected during metalwork, filler, or blocking stages
• Compatible with most filler and primer systems

It’s the essential first coat in any serious restoration workflow.

1. Prepare bare steel (DA with P80, degrease, and blow clean)
2. Mix at 4:1 with Epoxy Hardener, then add 25% RestoFinish Epoxy Reducer
3. Spray two even coats for a total film build of 150 microns
4. Allow full cure before sanding, or apply filler within the recoat window
5. For sealer applications or low-build areas, reduce up to 40%

Why Choose RestoFinish EpoxyCoat

• Proudly Australian Made and Developed
• Zinc-phosphate formulation for maximum corrosion resistance
• Designed specifically for car restoration – not generic collision work
• High build capacity reduces chance of cut-through during filler shaping
• Safe for Direct-to-Metal use or over sound existing coatings
• Trusted by professionals restoring classics, customs, and coach-built vehicles

Pro Tip

“A true restoration-grade epoxy should do more than just stick — it should protect. RestoFinish EpoxyCoat gives a solid 150 micron foundation in just two coats. It bonds, it seals, and it resists everything. Whether your leaving a project bare for weeks or starting filler in the next few days, this primer gives you the confidence that it’s started right.”

Product Specs

• Kit Size: 7 Litres (includes hardener + reducer)
• Mix Ratio: 4:1 (plus 25–40% reducer depending on build)
• Film Build: ~75 microns per coat
• Surface Compatibility: Bare steel, existing coatings, body filler
• Cure Profile: Sandable after full cure; filler application within recoat window
• Colour: Black
• Individual components also sold separately

*Always refer to the appropriate product technical data sheet prior to use

RestoFinish Epoxycoat TDS

*We do not currently ship this product outside of Australia, please allow 14 working days for deliveries to Western Australia

**Orders sent to Western Australia and Northern Territory may incur a dangerous goods surcharge, please contact us to confirm before placing your order